CI for typical refinery
- hyeung
- Topic Author
- Offline
Less
More
- Posts: 1
- Thank you received: 0
2 years 11 months ago #320
by hyeung
CI for typical refinery was created by hyeung
Is it possible to use the GHGenius program to calculate the CI for non-renewable sources? I have site specific data to input for a refinery producing low sulphur diesel, but cannot figure out how to add all the data in.
So far:
Transportation of Feedstocks - input km for Crude Oil in column B
Transportation of Finished Fuels - should I use column K (Diesel - Used Oil)?
Alternative Fuel Production - Cannot figure out where to put site specific emissions for a refinery in this section.
So far:
Transportation of Feedstocks - input km for Crude Oil in column B
Transportation of Finished Fuels - should I use column K (Diesel - Used Oil)?
Alternative Fuel Production - Cannot figure out where to put site specific emissions for a refinery in this section.
Please Log in or Create an account to join the conversation.
- doconnor
- Offline
Less
More
- Posts: 183
- Thank you received: 33
2 years 11 months ago #322
by doconnor
Replied by doconnor on topic CI for typical refinery
Individual refineries can be modelled with GHGenius but the process is not straightforward and it takes a high level of skill with LCAs and with GHGenius.
Changes would be made on the crude oil supply sheet and on the Refineries sheet.
A refinery that only produces LSD is not a typical refinery.
I can't provide more guidance without more information.
Regards
Don O'Connor
Changes would be made on the crude oil supply sheet and on the Refineries sheet.
A refinery that only produces LSD is not a typical refinery.
I can't provide more guidance without more information.
Regards
Don O'Connor
Please Log in or Create an account to join the conversation.
- You are here:
- Home
- Forum
- Main Forum
- GHGenius Questions
- CI for typical refinery